so if i want to know but cannot know who will know so that i may know and NOW.
- Comment
- Reblog
-
Subscribe
Subscribed
Already have a WordPress.com account? Log in now.
so if i want to know but cannot know who will know so that i may know and NOW.
algsci 
September 23, 2006 at 9:17 pm
Hi, this is a comment.
To delete a comment, just log in, and view the posts’ comments, there you will have the option to edit or delete them.
January 16, 2007 at 4:56 pm
In our 2nd period Integrated Science class we had to build a balloon car. It was a very interesting thing to make. I didn’t think it would so easy to build a car with the axels and the balloon. We took our diagram and measured it to know what the measurement of the car was to build the frame of it.
The first thing we had to do is read the instructions on how to build the car. The paper had a diagram of how to build the frame and where to fold the paper and all that good stuff.
Then we had to tape all the sides together, and make sure that they were even. We had to make axels for the wheels, and make sure that they were the right length apart so that it would even out the car. Then we had to get a tube and stick a balloon on it and then stick it to the car. My car didn’t go but about 21 ft but it was all good because I still passed.
January 23, 2007 at 6:03 pm
1/23/07
Integrated Science:
Rewrite your blog assignment and save in as a Word Document in your student folder with the following changes:
Title:
I. Introduction
II. Describe Construction
III. Table of Resullts
IV. Discussion of Reslults
– Strengths/Weaknesses
– Compare to one other car
January 31, 2007 at 4:53 pm
Rosa Rodriguez
January 30, 2007
Integrated Science
Mr. Kerr
Outline
Title: Balloon Car
For Integrated Science we had to balloon car. It wasn’t quite easy because we had to make it out of axels and with a balloon. First what we had to do was cut out the outline and tape it to construction paper. After we did that we got a straw taped it to the back and the put the wheels on all four sides. Then we got a balloon and taped it to tube stick. Even though my car didn’t go very fast, it was still a cool project.
January 31, 2007 at 5:02 pm
Rosa Rodriguez
January 30, 2007
Integrated Science
Mr. Kerr
Outline
Title: Balloon Car
For Integrated Science we had to balloon car. It wasn’t quite easy because we had to make it out of axels and with a balloon. First what we had to do was cut out the outline and tape it to construction paper. After we did that we got a straw taped it to the back and the put the wheels on all four sides. Then we got a balloon and taped it to tube stick. Even though my car didn’t go very fast, it was still a cool project.
Balloon Car Wt.(g) Sec./20feet D(ft) Andrew 21.48 8.75 48 Luis 21.16 6.18 N/A Cory 24.53 6.31 36 Jaron 22.65 6.21 36 Ruben 33.24 4.75 36 Tyler 36.52 6.4 40 Rosa 25.3 N/A N/A Aaron 20.39 7.4 21
April 9, 2016 at 9:33 am
ud83dude00 umm… you know your blog is really boring!!ud83dude1b Click http://www.l33turl.com/justgoo091730