Comments on: hello world. http://ekerr.wordpress.com/2006/09/23/hello-world/ Just another WordPress.com weblog Wed, 31 Jan 2007 17:13:08 +0000 http://wordpress.com/ hourly 1 By: Rosa Rodriguez http://ekerr.wordpress.com/2006/09/23/hello-world/#comment-32 Rosa Rodriguez Wed, 31 Jan 2007 17:02:03 +0000 #comment-32 Rosa Rodriguez January 30, 2007 Integrated Science Mr. Kerr Outline Title: Balloon Car For Integrated Science we had to balloon car. It wasn’t quite easy because we had to make it out of axels and with a balloon. First what we had to do was cut out the outline and tape it to construction paper. After we did that we got a straw taped it to the back and the put the wheels on all four sides. Then we got a balloon and taped it to tube stick. Even though my car didn’t go very fast, it was still a cool project. Balloon Car Wt.(g) Sec./20feet D(ft) Andrew 21.48 8.75 48 Luis 21.16 6.18 N/A Cory 24.53 6.31 36 Jaron 22.65 6.21 36 Ruben 33.24 4.75 36 Tyler 36.52 6.4 40 Rosa 25.3 N/A N/A Aaron 20.39 7.4 21 Rosa Rodriguez

January 30, 2007

Integrated Science

Mr. Kerr
Outline

Title: Balloon Car

For Integrated Science we had to balloon car. It wasn’t quite easy because we had to make it out of axels and with a balloon. First what we had to do was cut out the outline and tape it to construction paper. After we did that we got a straw taped it to the back and the put the wheels on all four sides. Then we got a balloon and taped it to tube stick. Even though my car didn’t go very fast, it was still a cool project.

Balloon Car Wt.(g) Sec./20feet D(ft) Andrew 21.48 8.75 48 Luis 21.16 6.18 N/A Cory 24.53 6.31 36 Jaron 22.65 6.21 36 Ruben 33.24 4.75 36 Tyler 36.52 6.4 40 Rosa 25.3 N/A N/A Aaron 20.39 7.4 21

]]> By: Rosa Rodriguez http://ekerr.wordpress.com/2006/09/23/hello-world/#comment-31 Rosa Rodriguez Wed, 31 Jan 2007 16:53:59 +0000 #comment-31 Rosa Rodriguez January 30, 2007 Integrated Science Mr. Kerr Outline Title: Balloon Car For Integrated Science we had to balloon car. It wasn't quite easy because we had to make it out of axels and with a balloon. First what we had to do was cut out the outline and tape it to construction paper. After we did that we got a straw taped it to the back and the put the wheels on all four sides. Then we got a balloon and taped it to tube stick. Even though my car didn't go very fast, it was still a cool project. Rosa Rodriguez

January 30, 2007

Integrated Science

Mr. Kerr
Outline

Title: Balloon Car

For Integrated Science we had to balloon car. It wasn’t quite easy because we had to make it out of axels and with a balloon. First what we had to do was cut out the outline and tape it to construction paper. After we did that we got a straw taped it to the back and the put the wheels on all four sides. Then we got a balloon and taped it to tube stick. Even though my car didn’t go very fast, it was still a cool project.

]]> By: ekerr http://ekerr.wordpress.com/2006/09/23/hello-world/#comment-20 ekerr Tue, 23 Jan 2007 18:03:55 +0000 #comment-20 1/23/07 Integrated Science: Rewrite your blog assignment and save in as a Word Document in your student folder with the following changes: Title: I. Introduction II. Describe Construction III. Table of Resullts IV. Discussion of Reslults - Strengths/Weaknesses - Compare to one other car 1/23/07
Integrated Science:
Rewrite your blog assignment and save in as a Word Document in your student folder with the following changes:

Title:
I. Introduction
II. Describe Construction
III. Table of Resullts
IV. Discussion of Reslults
– Strengths/Weaknesses
– Compare to one other car

]]> By: Arron McClain http://ekerr.wordpress.com/2006/09/23/hello-world/#comment-15 Arron McClain Tue, 16 Jan 2007 16:56:03 +0000 #comment-15 In our 2nd period Integrated Science class we had to build a balloon car. It was a very interesting thing to make. I didn’t think it would so easy to build a car with the axels and the balloon. We took our diagram and measured it to know what the measurement of the car was to build the frame of it. The first thing we had to do is read the instructions on how to build the car. The paper had a diagram of how to build the frame and where to fold the paper and all that good stuff. Then we had to tape all the sides together, and make sure that they were even. We had to make axels for the wheels, and make sure that they were the right length apart so that it would even out the car. Then we had to get a tube and stick a balloon on it and then stick it to the car. My car didn’t go but about 21 ft but it was all good because I still passed. In our 2nd period Integrated Science class we had to build a balloon car. It was a very interesting thing to make. I didn’t think it would so easy to build a car with the axels and the balloon. We took our diagram and measured it to know what the measurement of the car was to build the frame of it.
The first thing we had to do is read the instructions on how to build the car. The paper had a diagram of how to build the frame and where to fold the paper and all that good stuff.
Then we had to tape all the sides together, and make sure that they were even. We had to make axels for the wheels, and make sure that they were the right length apart so that it would even out the car. Then we had to get a tube and stick a balloon on it and then stick it to the car. My car didn’t go but about 21 ft but it was all good because I still passed.

]]> By: Mr WordPress http://ekerr.wordpress.com/2006/09/23/hello-world/#comment-1 Mr WordPress Sat, 23 Sep 2006 21:17:03 +0000 #comment-1 Hi, this is a comment.<br />To delete a comment, just log in, and view the posts' comments, there you will have the option to edit or delete them. Hi, this is a comment.
To delete a comment, just log in, and view the posts’ comments, there you will have the option to edit or delete them.

]]>